Application: Tubes for machinery and plant construction
Standard: EN 10296
Designation of material: E275
General
Material number: 1.0225
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 275 (39 900) Max: -
Tensile strength Rm MPa (in PSI): Min: 410 (59 500) Max: -
Elongation (% min.): transverse: 19 longitudinal: 21
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-
transverse: -
 
longitudinal: -
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.21
Si:-0.35
Mn:-1.4
P:-0.045
S:-0.045
Nb:--
V:--
Al total:--
Ti:--
Cr:--
Ni:--
Mo:--
Cu:--
N:--
CEV max in %: -
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back