S355G1+N
| Application: | Structural tubes, circular / Structural tubes for offshore applications |
| Standard: | EN 10225 |
| Designation of material: | S355G1+N |
| General | |
|---|---|
| Material number: | 1.8814+N |
| Former designation: |
| Mechanical properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Yield strength Rp0,5 MPa (in PSI): | Min: 355 (51 500)** | Max: - | ||||||||
| Tensile strength Rm MPa (in PSI): | Min: 470 (68 200) | Max: 630 (91 400) | ||||||||
| Elongation (% min.): | transverse: - | longitudinal: 22 | ||||||||
Impact strength:
|
|
| ||||||||
| Hardness (max. HRC): | - |
| Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
| CEV max in %: | ** |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
