S355MLH
Application: | Structural tubes, circular / Structural tubes for offshore applications |
Standard: | EN 10219-1 |
Designation of material: | S355MLH |
General | |
---|---|
Material number: | 1.8846 |
Former designation: | - |
Mechanical properties | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Yield strength Rp0,5 MPa (in PSI): | Min: 355 (51 500)** | Max: - | ||||||||
Tensile strength Rm MPa (in PSI): | Min: 450 (65 300) | Max: 610 (88 500) | ||||||||
Elongation (% min.): | transverse: - | longitudinal: 22 | ||||||||
Impact strength:
|
|
| ||||||||
Hardness (max. HRC): | - |
Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
CEV max in %: | 0.39 |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size