S355NLH
Application: | Structural tubes, circular / Structural tubes for offshore applications |
Standard: | EN 10210-1 |
Designation of material: | S355NLH |
General | |
---|---|
Material number: | 1.0549 |
Former designation: | - |
Mechanical properties | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Yield strength Rp0,5 MPa (in PSI): | Min: 355 (51 500)** | Max: - | ||||||||
Tensile strength Rm MPa (in PSI): | Min: 470 (68 200) | Max: 630 (91 400) | ||||||||
Elongation (% min.): | transverse: 20 | longitudinal: 22 | ||||||||
Impact strength:
|
|
| ||||||||
Hardness (max. HRC): | - |
Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
CEV max in %: | 0.43** |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size