Application: MSH-sections, square and rectangular
Standard: EN 10210-1
Designation of material: S275J2H
General
Material number: 1.0138
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 275 (39 900)** Max: -
Tensile strength Rm MPa (in PSI): Min: 410 (59 500)** Max: 560 (81 200)**
Elongation (% min.): transverse: 21 longitudinal: 23
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-20
transverse: 27
 
longitudinal: **
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.2**
Si:--
Mn:-1.5
P:-0.03
S:-0.03
Nb:--
V:--
Al total:****
Ti:--
Cr:--
Ni:--
Mo:--
Cu:--
N:--**
CEV max in %: 0.41**
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back