L80
| Application: | Oilfield tubulars (OCTG) |
| Standard: | API 5 CT |
| Designation of material: | L80 |
| General | |
|---|---|
| Material number: | - |
| Former designation: | - |
| Mechanical properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Yield strength Rp0,5 MPa (in PSI): | Min: 552 (80 000) | Max: 655 (95 000) | ||||||||
| Tensile strength Rm MPa (in PSI): | Min: 655 (95 000) | Max: - | ||||||||
| Elongation (% min.): | transverse: - | longitudinal: - | ||||||||
Impact strength:
|
|
| ||||||||
| Hardness (max. HRC): | 23 |
| Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
| CEV max in %: | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
