St 44.0
Application: | Line pipe for oil and other combustible liquids, natural gas and other gaseous media |
Standard: | DIN 1626 (obsolete) |
Designation of material: | St 44.0 |
General | |
---|---|
Material number: | 1.0256 |
Former designation: | - |
Mechanical properties | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Yield strength Rp0,5 MPa (in PSI): | Min: 275 (39 900)** | Max: - | ||||||||
Tensile strength Rm MPa (in PSI): | Min: 420 (60 900)** | Max: 550 (79 700) | ||||||||
Elongation (% min.): | transverse: 19 | longitudinal: 21 | ||||||||
Impact strength:
|
|
| ||||||||
Hardness (max. HRC): | - |
Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
CEV max in %: | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size