L415NE / X60NE
Application: | Line pipe for oil and other combustible liquids, natural gas and other gaseous media |
Standard: | EN ISO 3183 (PSL 2), Anhang M |
Designation of material: | L415NE / X60NE |
General | |
---|---|
Material number: | 1.8972 |
Former designation: | L415NB |
Mechanical properties | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Yield strength Rp0,5 MPa (in PSI): | Min: 415 (60 200) | Max: 565 (81 900) | ||||||||
Tensile strength Rm MPa (in PSI): | Min: 520 (75 400) | Max: 760 (110 200) | ||||||||
Elongation (% min.): | transverse: 18 | longitudinal: 20 | ||||||||
Impact strength:
|
|
| ||||||||
Hardness (max. HRC): | - |
Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
CEV max in %: | * |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size