P355NH
Application: | Tubes & pipes for various applications (multi-certified) |
Standard: | EN 10217-3 |
Designation of material: | P355NH |
General | |
---|---|
Material number: | 1.0565 |
Former designation: | WStE 355 |
Mechanical properties | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Yield strength Rp0,5 MPa (in PSI): | Min: 355 (51 500)** | Max: - | ||||||||
Tensile strength Rm MPa (in PSI): | Min: 490 (71 100) | Max: 650 (94 300)** | ||||||||
Elongation (% min.): | transverse: 20 | longitudinal: 22 | ||||||||
Impact strength:
|
|
| ||||||||
Hardness (max. HRC): | - |
Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
CEV max in %: | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size