L355
| Application: | Line pipe for the transportation of drinking water, industrial water and waste water |
| Standard: | EN 10224 |
| Designation of material: | L355 |
| General | |
|---|---|
| Material number: | 1.0419 |
| Former designation: | St 52.0 |
| Mechanical properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Yield strength Rp0,5 MPa (in PSI): | Min: 355 (51 500)** | Max: - | ||||||||
| Tensile strength Rm MPa (in PSI): | Min: 500 (72 500) | Max: 650 (94 300) | ||||||||
| Elongation (% min.): | transverse: 19 | longitudinal: 21 | ||||||||
Impact strength:
|
|
| ||||||||
| Hardness (max. HRC): | - |
| Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
| CEV max in %: | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
