Application: Tubes for machinery and plant construction
Standard: EN 10296
Designation of material: E275K2
General
Material number: 1.0456
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 275 (39 900)** Max: -
Tensile strength Rm MPa (in PSI): Min: 370 (53 700) Max: -
Elongation (% min.): transverse: 22 longitudinal: 24**
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-20
transverse: -
 
longitudinal: 40
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.2
Si:-0.4
Mn:0.51.4
P:-0.035
S:-0.03
Nb:-0.05
V:-0.05
Al total:0.02**-
Ti:-0.03
Cr:-0.3
Ni:-0.3
Mo:-0.1
Cu:-0.35**
N:-0.015
CEV max in %: -
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back