E275K2
| Application: | Tubes for machinery and plant construction |
| Standard: | EN 10296 |
| Designation of material: | E275K2 |
| General | |
|---|---|
| Material number: | 1.0456 |
| Former designation: | - |
| Mechanical properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Yield strength Rp0,5 MPa (in PSI): | Min: 275 (39 900)** | Max: - | ||||||||
| Tensile strength Rm MPa (in PSI): | Min: 370 (53 700) | Max: - | ||||||||
| Elongation (% min.): | transverse: 22 | longitudinal: 24** | ||||||||
Impact strength:
|
|
| ||||||||
| Hardness (max. HRC): | - |
| Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
| CEV max in %: | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
