E320
Application: | Tubes for machinery and plant construction |
Standard: | EN 10296 |
Designation of material: | E320 |
General | |
---|---|
Material number: | 1.0237 |
Former designation: | - |
Mechanical properties | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Yield strength Rp0,5 MPa (in PSI): | Min: 320 (46 400) | Max: - | ||||||||
Tensile strength Rm MPa (in PSI): | Min: 410 (59 500) | Max: - | ||||||||
Elongation (% min.): | transverse: 17 | longitudinal: 19** | ||||||||
Impact strength:
|
|
| ||||||||
Hardness (max. HRC): | - |
Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
CEV max in %: | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size