E235
Application: | Tubes for machinery and plant construction |
Standard: | EN 10296 |
Designation of material: | E235 |
General | |
---|---|
Material number: | 1.0308 |
Former designation: | - |
Mechanical properties | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Yield strength Rp0,5 MPa (in PSI): | Min: 235 (34 100) | Max: - | ||||||||
Tensile strength Rm MPa (in PSI): | Min: 340 (49 300) | Max: - | ||||||||
Elongation (% min.): | transverse: 23 | longitudinal: 25 | ||||||||
Impact strength:
|
|
| ||||||||
Hardness (max. HRC): | - |
Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
CEV max in %: | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size