Application: Structural tubes, circular / Structural tubes for offshore applications
Standard: EN 10225
Designation of material: S355G1+N
General
Material number: 1.8814+N
Former designation:
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 355 (51 500)** Max: -
Tensile strength Rm MPa (in PSI): Min: 470 (68 200) Max: 630 (91 400)
Elongation (% min.): transverse: - longitudinal: 22
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-20
transverse: **
 
longitudinal: 50
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.2
Si:0.50.9
Mn:-1.65
P:-0.035
S:-0.03
Nb:-0.05
V:-0.12
Al total:0.02**-
Ti:-0.03
Cr:-0.3
Ni:-0.5
Mo:-0.1
Cu:-0.35
N:-0.015
CEV max in %: **
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back