S420MH
| Application: | Structural tubes, circular / Structural tubes for offshore applications |
| Standard: | EN 10219-1 |
| Designation of material: | S420MH |
| General | |
|---|---|
| Material number: | 1.8847 |
| Former designation: | - |
| Mechanical properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Yield strength Rp0,5 MPa (in PSI): | Min: 420 (40 900)** | Max: - | ||||||||
| Tensile strength Rm MPa (in PSI): | Min: 500 (72 500) | Max: 660 (95 700) | ||||||||
| Elongation (% min.): | transverse: - | longitudinal: 19 | ||||||||
Impact strength:
|
|
| ||||||||
| Hardness (max. HRC): | - |
| Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
| CEV max in %: | 0.43 |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
