Application: Structural tubes, circular / Structural tubes for offshore applications
Standard: EN 10219-1
Designation of material: S235JRH
General
Material number: 1.0039
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 235 (34 100)** Max: -
Tensile strength Rm MPa (in PSI): Min: 360 (52 200)** Max: 510 (74 000)**
Elongation (% min.): transverse: - longitudinal: 24**
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
20
transverse: 27
 
longitudinal: **
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.17
Si:--
Mn:-1.4
P:-0.04
S:-0.04
Nb:--
V:--
Al total:0.02**-
Ti:--
Cr:--
Ni:--
Mo:--
Cu:--
N:-0.009**
CEV max in %: 0.35
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back