Application: MSH-sections, square and rectangular
Standard: EN 10210-1
Designation of material: S275NLH
General
Material number: 1.0497
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 275 (39 900)** Max: -
Tensile strength Rm MPa (in PSI): Min: 370 (53 700) Max: 510 (74 000)
Elongation (% min.): transverse: 22 longitudinal: 24
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-50
transverse: 27
 
longitudinal: **
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.2**
Si:-0.4
Mn:0.51.4
P:-0.03
S:-0.025
Nb:-0.05
V:-0.08
Al total:0.02**-
Ti:-0.03
Cr:-0.3
Ni:-0.3**
Mo:-0.1
Cu:-0.35**
N:-0.015
CEV max in %: 0.4**
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back