Application: MSH-sections, square and rectangular
Standard: EN 10225
Designation of material: S355G13+N
General
Material number: 1.1182+N
Former designation:
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 355 (51 500)** Max: -
Tensile strength Rm MPa (in PSI): Min: 460 (66 700) Max: 620 (90 000)
Elongation (% min.): transverse: - longitudinal: 22
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-40
transverse: **
 
longitudinal: 50
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.16
Si:0.150.55
Mn:-1.6
P:-0.025
S:-0.015
Nb:-0.05**
V:-0.1**
Al total:0.06**-
Ti:-0.02**
Cr:-0.25**
Ni:-0.3**
Mo:-0.08**
Cu:-0.35**
N:-0.014
CEV max in %: 0.45
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back