Application: Oilfield tubulars (OCTG)
Standard: API 5 CT
Designation of material: L80
General
Material number: -
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 552 (80 000) Max: 655 (95 000)
Tensile strength Rm MPa (in PSI): Min: 655 (95 000) Max: -
Elongation (% min.): transverse: - longitudinal: -
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-
transverse: -
 
longitudinal: -
Hardness (max. HRC):23
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.43**
Si:-0.45
Mn:-1.9
P:-0.03
S:-0.03
Nb:--
V:--
Al total:--
Ti:--
Cr:--
Ni:-0.25
Mo:--
Cu:-0.35
N:--
CEV max in %: -
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back