Application: Oilfield tubulars (OCTG)
Standard: API 5 CT
Designation of material: H40
General
Material number: -
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 276 (40 000) Max: 552 (80 000)
Tensile strength Rm MPa (in PSI): Min: 414 (60 000) Max: -
Elongation (% min.): transverse: - longitudinal: -
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-
transverse: -
 
longitudinal: -
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:--
Si:--
Mn:--
P:-0.03
S:-0.03
Nb:--
V:--
Al total:--
Ti:--
Cr:--
Ni:--
Mo:--
Cu:--
N:--
CEV max in %: -
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back