L360GA
Application: | Line pipe for oil and other combustible liquids, natural gas and other gaseous media |
Standard: | EN 10208-1 (obsolete) |
Designation of material: | L360GA |
General | |
---|---|
Material number: | 1.0499 |
Former designation: | St 52.0 |
Mechanical properties | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Yield strength Rp0,5 MPa (in PSI): | Min: 360 (52 200) | Max: - | ||||||||
Tensile strength Rm MPa (in PSI): | Min: 460 (66 700) | Max: 620 (90 000) | ||||||||
Elongation (% min.): | transverse: 20 | longitudinal: 22 | ||||||||
Impact strength:
|
|
| ||||||||
Hardness (max. HRC): | - |
Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
CEV max in %: | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size