Application: Line pipe for oil and other combustible liquids, natural gas and other gaseous media
Standard: EN 10208-1 (obsolete)
Designation of material: L245GA
General
Material number: 1.0459
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 245 (35 500) Max: -
Tensile strength Rm MPa (in PSI): Min: 415 (60 200) Max: 555 (80 500)
Elongation (% min.): transverse: 22 longitudinal: 24
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-
transverse: -
 
longitudinal: -
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.2
Si:-0.4
Mn:-1.15
P:-0.03
S:-0.03
Nb:--
V:--
Al total:0.0150.06
Ti:--
Cr:--
Ni:--
Mo:--
Cu:--
N:--
CEV max in %: -
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back