Application: Line pipe for oil and other combustible liquids, natural gas and other gaseous media
Standard: DNV OS-F101
Designation of material: HFW 485M (+suffix)
General
Material number: -
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 485 (70 300)** Max: 605 (87 700)**
Tensile strength Rm MPa (in PSI): Min: 570 (82 700)** Max: 760 (110 200)**
Elongation (% min.): transverse: ** longitudinal: **
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
*
transverse: 50
 
longitudinal: **
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.12**
Si:-0.45
Mn:-1.75**
P:-0.02
S:-0.01
Nb:-0.08**
V:-0.1**
Al total:--
Ti:-0.04**
Cr:-0.5
Ni:-0.5
Mo:-0.5
Cu:-0.5
N:--
CEV max in %: 0.22**
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back