L485ME / X70ME
| Application: | Line pipe for oil and other combustible liquids, natural gas and other gaseous media |
| Standard: | EN ISO 3183 (PSL 2), Anhang M |
| Designation of material: | L485ME / X70ME |
| General | |
|---|---|
| Material number: | 1.8977 |
| Former designation: | L485MB |
| Mechanical properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Yield strength Rp0,5 MPa (in PSI): | Min: 485 (70 300) | Max: 605 (92 100) | ||||||||
| Tensile strength Rm MPa (in PSI): | Min: 570 (82 700) | Max: 760 (110 200) | ||||||||
| Elongation (% min.): | transverse: 18 | longitudinal: 20 | ||||||||
Impact strength:
|
|
| ||||||||
| Hardness (max. HRC): | - |
| Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
| CEV max in %: | 0.43 |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
