Application: Line pipe for oil and other combustible liquids, natural gas and other gaseous media
Standard: EN ISO 3183 (PSL 2), Anhang M
Designation of material: L360NE / X52NE
General
Material number: 1.0582
Former designation: L360NB
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 360 (52 200) Max: 510 (74 000)
Tensile strength Rm MPa (in PSI): Min: 460 (66 700) Max: 760 (110 200)
Elongation (% min.): transverse: 20 longitudinal: 22
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
0*
transverse: 40
 
longitudinal: **
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.22**
Si:-0.45
Mn:-1.4**
P:-0.025
S:-0.015
Nb:-0.05**
V:-0.1**
Al total:0.015**0.06**
Ti:-0.04**
Cr:-0.3
Ni:-0.3
Mo:-0.1
Cu:-0.25
N:-0.012**
CEV max in %: 0.43
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back