L485MB

Application: Line pipe for oil and other combustible liquids, natural gas and other gaseous media
Standard: EN 10208-2 (obsolete)
Designation of material: L485MB
General
Material number: 1.8977
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 485 (70 300) Max: 605 (87 700)
Tensile strength Rm MPa (in PSI): Min: 570 (82 700) Max: -
Elongation (% min.): transverse: 18 longitudinal: 20
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
0
transverse: 40
 
longitudinal: 60
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.16**
Si:-0.45
Mn:-1.7**
P:-0.025
S:-0.02
Nb:-0.06**
V:-0.1**
Al total:0.015**0.06**
Ti:-0.06**
Cr:-0.3
Ni:-0.3
Mo:-0.1*
Cu:-0.25
N:-0.012
CEV max in %: 0.43
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back
Sales contacts
Sales contacts
Environmental Product Declaration Steel Oil and Gas Line Pipe
Environmental Product Declaration