St 37.0
| Application: | Line pipe for oil and other combustible liquids, natural gas and other gaseous media |
| Standard: | DIN 1626 (obsolete) |
| Designation of material: | St 37.0 |
| General | |
|---|---|
| Material number: | 1.0254 |
| Former designation: | - |
| Mechanical properties | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Yield strength Rp0,5 MPa (in PSI): | Min: 235 (34 100) | Max: - | ||||||||
| Tensile strength Rm MPa (in PSI): | Min: 350 (50 800) | Max: 480 (69 600) | ||||||||
| Elongation (% min.): | transverse: 23 | longitudinal: 25 | ||||||||
Impact strength:
|
|
| ||||||||
| Hardness (max. HRC): | - |
| Chemical composition | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Content in mass-%: |
| |||||||||||||||||||||||||||||||||||||||||||||
| CEV max in %: | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
