Application: Tubes & pipes for various applications (multi-certified)
Standard: EN 10217-3
Designation of material: P355NL1
General
Material number: 1.0566
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 355 (51 500)** Max: -
Tensile strength Rm MPa (in PSI): Min: 490 (71 100) Max: 650 (94 300)**
Elongation (% min.): transverse: 20 longitudinal: 22
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-40 / -30 / -20 / -10 / 0 / 20
transverse: 27 / 31 / 35 / 39 / 43 / 47
 
longitudinal: 40 / 47 / 53 / 0 / 65 / 70
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.18
Si:-0.5
Mn:0.91.7
P:-0.025
S:-0.02
Nb:-0.05**
V:-0.1**
Al total:0.02**-
Ti:-0.03**
Cr:-0.3**
Ni:-0.5
Mo:-0.08**
Cu:-0.3**
N:-0.02
CEV max in %: -
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back