Application: Tubes & pipes for various applications (multi-certified)
Standard: EN 10217-1
Designation of material: P265TR1
General
Material number: 1.0258
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 265 (38 400)** Max: -
Tensile strength Rm MPa (in PSI): Min: 410 (59 500) Max: 570 (82 700)
Elongation (% min.): transverse: 19 longitudinal: 21
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-
transverse: -
 
longitudinal: -
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.2
Si:-0.4
Mn:-1.4
P:-0.025
S:-0.02
Nb:-0.01
V:-0.02
Al total:--
Ti:-0.04
Cr:-0.3**
Ni:-0.3**
Mo:-0.08**
Cu:-0.3*
N:--
CEV max in %: -
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back