Application: Boiler tubes and tubes for equipment
Standard: EN 10217-4
Designation of material: P215NL
General
Material number: 1.0451
Former designation: -
Mechanical properties
Yield strength Rp0,5 MPa (in PSI): Min: 215 (31 200) Max: -
Tensile strength Rm MPa (in PSI): Min: 360 (52 200) Max: 480 (69 600)
Elongation (% min.): transverse: 23 longitudinal: 25
Impact strength:
Test temperature in °C:
Min. average impact energy in J:
-40 / -20 / 20
transverse: -
 
longitudinal: 40 / 45 / 55**
Hardness (max. HRC):-
Chemical composition
Content in mass-%:
Quality:Min:Max:
C:-0.15
Si:-0.35
Mn:0.41.2
P:-0.025
S:-0.02
Nb:-0.01
V:-0.02
Al total:0.02**-
Ti:-0.03
Cr:-0.3
Ni:-0.3
Mo:-0.08
Cu:-0.3
N:--
CEV max in %: -
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size
back